SMT NOZZLE STORE

Today, a customer asked a question like this. In the normal production process, the nozzle of Panasonic CM402 was broken, and the pressing cover was normal. But the Pick-and-place nozzle was broken, and it was the fifth head of tbl-1. I wonder if you have ever met such a problem? How to solve these problems? Let's share the following reasons. 1. Check whether the pressing cover is normal. 2. Whether there are foreign matters in the equipment. 3. Check the lower belt and motor. 4. Check whether the machine system is abnormal. You can clean the machine memory. The above four points are about the cause analysis of the break of the Panasonic CM402 nozzle . The specific analysis is needed to find the right way to solve the problems. A Set of Panasonic High-Speed Mounter CM402 Pick-and-place Nozzle Core 110 , 115 , 120 , 130 , 140 , 161 , 162 , 163 , 185 , 205 , 206A , 225C , 226C , 230C , 235C , 240C , 256C ( 203Z ).

Why the nozzles of Panasonic CM602 placement machine can't suck the tray？ 1. Check whether the nozzle is blocked by foreign objects (the solder paste and components may block the nozzle). Solution: Clean the nozzle. 2. Check whether the vacuum degree is normal and the vacuum pipeline is smooth. 3. Check whether the suction stroke of the nozzle is appropriate. 4. Check if the suction delay is set to match. The Panasonic Nozzle Core 110S , 115AS , 120S , 130S , 140S , 161S , 162S , 163S , 205S , 206AS , 225CS , 226CS , 230CS , 235CS , 240CS , 256CS are suitable for your Panasonic High-Speed Mounter CM602