SMT NOZZLE STORE

The filter of SMT placement machine is different from the general air filter, and it is a common consumable of SMT placement machine. Its main role is to prevent dust, foreign objects, water, oil and other substances from entering the placement machine to ensure the cleanliness of the components of the placement machine so that the machine can operate normally. Filter has different specifications and models for different placement machines. Oil and moisture will be generated in the compressed air to filter some foreign objects and impurities. So as not to affect the life of the equipment, resulting in low production efficiency. The dust in the air falls on the rotating parts of the machine, which will accelerate the wear of the rotating parts, reduce the accuracy and life of the machine. Dust diffuses in the workshop, and can also reduce visibility, affect the field of vision, hinder operation, reduce labor productivity, and even cause accident. Dust discharge into the atmosphere can c...

In the SMT production process, feeder throwing material is a common issue. Today we analyze some problems of Siemens feeder throwing materials. 1. The problem of the nozzle of Siemens placement machine: The deformation, clogging and damage of the suction nozzle will cause insufficient air pressure and air leakage, which will cause the suction of the material to be unavailable, the material is not taken correctly, or the material cannot be identified and the material is thrown; Solution: replace the nozzle E.g:  Siemens 901 SMT Nozzle - Part Number: 00322603, 0.95 mm x 1.4 mm Siemens 902 SMT Nozzle - Part Number: 00348186, 0.95 mm x 0.5 mm Siemens 904 SMT Nozzle - Part Number: 00322602, 1.2 mm x 1.8 mm Siemens 906 SMT Nozzle - Part Number: 00345031, 0.5 mm x 0.35 mm Siemens 925 SMT Nozzle - Part Number: 00333652, 0.43 mm x 0.63 mm 2. The problem of the recognition system of Siemens placement machine accessories: When there are dirt or debris on the visual or laser lens that in...

Juki KE-2050 nozzle is not directly connected to the placement machine, there is actually another part connected between them-nozzle holder. We installed the nozzle of the Juki placement machine KE-2050 on the nozzle holder, and then installed the nozzle holder on the placement machine. This will cause a problem that the nozzle is easily separated from the nozzle holder while playing. The reasons for the above problems may be as follows, we analyze them one by one: 1. The Juki KE-2050 nozzle holder with the nozzle is worn out during use and the size becomes smaller, which does not match the nozzle holder. At this time, replace the new nozzle holder. Of course, this is only a temporary solution to the problem, and the situation needs further analysis. 2. It is not the problem of the entire nozzle holder, but the inner gasket is worn or dropped in production, and it is sufficient to replace or reinstall a gasket. 3. The cause of the brake pads, there should be a phenomenon of jitter in...

The Sony placement machine F-130 has a small footprint and is a small placement machine. It is known as the SMT placement machine with high precision and multifunction of electronic parts in the industry. When you are still using the traditional high-speed turret placement machine , Sony placement machine F-130 has adopted CCD camera to identify parts, unique image recognition system, so that the placement accuracy reaches ±0.045mm The Sony mounter F-130 has developed the world's original patented planetary mounting head (planet head), which realizes two-way free rotation to achieve the best state of the placement, and the speed is more: 25,900CPH (0.139S/chip )(SI-F130) Sony F-130 SMD head The Sony F-130 placement machine achieves high placement accuracy, performs part recognition while moving the visual placement head quickly. Time-saving, using CCD camera to identify, the upright suction of the very small wafer parts can also be detected. The Sony F-130 pick-and-place machine re...